A Guide to Assessment Validation: Validating Assessments in Practice

A Guide to Assessment Validation: Validating Assessments in Practice

Blog Article

Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.

Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.

The Two Types of Assessment Validation Explained

The Essence of Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

Steps to Perform Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Timing of Assessment Tool Validation

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Hence, whenever new learning resources are bought, assessment tool validation is necessary before student use.

There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.

Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- when resources are updated
- add new training products on scope
- you review your course against training product updates
- you identify your learning resources as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

Selecting Training Products for Validation

Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.

What Do You Need for Assessment Tool Validation?

Academic Resources

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.

Validation Board

Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.

Collectively, your validation panel should have:

Up-to-date vocational competencies and industry skills pertinent to the unit being validated

Up-to-date knowledge and skills related to vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Essential Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment achieve consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Essential Rules of Evidence

Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid employing learning resources that fail to meet here all unit requirements, be sure to follow these guidelines:

Live Up to Your Words

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

change diapers

bottle preparation, bottle-feeding infants, and cleaning equipment

prepare solids and feed babies

respond to baby signs and cues appropriately

prepare and settle babies for sleep

monitor and promote physical exploration and gross motor skills suitable for the age

Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

All Requirements or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

Possible answers include:

Mandatory resources

Corresponding costs

Time allocated for activities

Allocated duties and responsibilities

When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Answers could include, but are not limited to:

Weather conditions – isolation of work area, engineering, PPE

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering, administrative controls

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.